All the praise aside, nothings perfect, and my little Hero was no exception. In fact it suffers from the same ailment as many devices fall victim too, where hardware vendors release their products with poor/inefficient software. So without going into too much detail on the ROM, as I’ve done that before, I’ve come up with what my idea of the perfect setup is for a fast, secure, ultra useful phone that does everything for you.

The ROM

In my previous article about the Android ROM’s, I blogged about some of the ROM’s available for the Hero platform, the most mature and reliable definitely being MoDaCo’s custom ROM (now at version 3.2).  After trialling Android 2.0/2.1 ROM’s I didn’t want to go back to a cupcake build (Android 1.5) so I’ve settled on Kagudroid 1.0-beta, made by Lox of LoxDev fame, a ROM which aims to be as clean as possible built from the AOSP sources.  It’s Sense-less in that it doesn’t have any of the HTC SenseUI software on there so there’s RAM and general speed improvements and runs smoothly and fast.

Kagudroid 0.1beta (running on AOSP 2.0)

The Perfect-ly Obvious

They deserve a mention as they’re used almost more than anything else on the phone, but any of the google suite is an absolute must if your a google account holder.  GMail, Maps, Places Directory and Tasks are what I use most often, but Google Goggles (image searching) is pretty nifty.

The Perfect Set of Utilities

Due to wiping the phone so many times, I’ve got a a set of applications (as well as their DB’s, so I don’t have to set them up every time), which I load before booting the new ROM.  I consider them essential and it’s just not the same without them.

Locale – Event Driven Profiles

(http://www.twofortyfouram.com/)

Locale’s that profiles menu on your old Nokia 5110, revitalised in way that profile selection is made almost completely automatic, driven by an event system that can act on almost anything thing the phone does, like GPS location, WIFI availability, time, date, battery health, availability of networks/services, etc etc and hundreds of combinations of each.

The Locale Profile Screen

These are my standard set of profiles (in order of preference, as they’ll override each other):

• Bedtime - In the vicinity of ‘Home’ after 11pm on a week night, phone notifications are silent, GPS turned off and Alarms set on loud to make sure I wake up the following morning
• Home – In the vicinity of the house, WIFI and bluetooth on, and volume set to relatively low
• Low Battery – Triggered anytime the battery is below 20%, basically shuts down 3G/Wifi data, GPS and Screen time out to increase time until phone death
• Office - In the vicinity of the office, WIFI/Bluetooth on and phone almost on silent, screen timeout set on high and Screebl (see below) disabled
• Default – Phone on loud setting, GPS/WIFI on (for location services) but most other services off as they’re unused

See?  Infinitely useful, and I’m only just using the most basic of features.

Screebl

(http://www.keyeslabs.com/joomla/index.php/projects/screebl)

Screebl is a simple app with one purpose, it saves battery life by keeping the screen timeout as low as possible, but at the same time using the phones accelerometer to detect when the phone is being held and keep the screen on while using Google Maps, messaging, web browsing etc.  The new version (v2.0) includes Locale plugin support to change Screebl settings on Locale profile change.

Wavesecure – Security

(https://www.wavesecure.com/)

Wavesecure definitely deserves a mention, even though I’ve fortunately not had to use it’s most useful features.  It’s a security app, that runs constantly and checks into a remote server where if the phone is lost/stolen you can physically lock down the device to disable it, and if required wipe it clean to protect personal data.  It’ll also report phones location upon request and can backup files/SMS on a scheduled basis.

Advanced Task Manager

(http://arronla.com/)

Advanced Task Manager is perfect for keeping the phone running as quickly as possible at all times, by automatically closing all non essential apps and freeing up much needed RAM.

The Perfect Set of Apps

There’s a load of other apps I use as well on a constant basic, but may not be quite as essential as those listed above

Dolphin Browser

(http://www.dolphinbrower.com)

I’m yet to see the newest HTC and/or Android brower from Android 2.1, but Dolphin Browser is much better and fuller featured than the Cupcake browsers that I used, it’s got tabs (on the screen where you can see them), Google bookmark sync to help typing out those pesky web address’s and a simple to use gesture feature which make the touch screen experience even easier.

Twidroid (or Seesmic too for ping.fm support) – Twitter Clients

(http://www.twidroid.com)

What can I say, I’m a Twitter geek, and Twidroid is defintely the most full features twitter client i know of, it lacks the streamlined integration of Peep, the HTC client but’s very configurable and looks sharp

Newsrob – Google Reader Client

Simple idea, scheduled retrieval of RSS/Podcast and Blog updates from my Google Reader account

Truphone & SIPDroid – VOIP Clients

(http://www.truphone.com)

You may remember Truphone from my N95 articles from a while back and I still use it too for cheap world wide phone calls, and free voip -> voip or skype calls all from within the program.  I’ve been testing SIPDroid as well with my VOIP carrier sipgate.co.uk.  The only problem I’ve got now is choosing which number to give to people as my primary number, I’ve no doubt within a very short time period VOIP accounts like this will be the norm on all data plans.

XBMC Remote Android (android-xbmcremote)

(http://code.google.com/p/android-xbmcremote/)

I’d only recently started using XBMC remote on an old laptop and it has revolutionised the way I watch media on TV, but one thing that annoyed me was needing a wireless keyboard/mouse to interact with it (or even worse, getting up and going to the TV to change media), until I found XBMC remote, like a virtual remote that works via HTTP over WIFI.  It can access almost every function within XBMC including whats playing, media list, info, etc and will even do WOL (Wake on LAN) to start the computer up after its been switched off.  I’ll never have to get off the couch again!!!

Others

• Transdroid – For access to a transmission-daemon for torrent monitoring, I use it for a number of torrent clients now, very useful! (http://www.transdroid.org/)
• chompSMS – Not essential, but who wouldn’t want the IPhone’s message screen, an almost exact copy from what I can see (http://www.chompsms.com)
• Better Keyboard and/or Shapewriter/Swype – Keyboard replacements that definitely make typing faster on the device (in fact, I’m typing this blog post with it right now!… .Not, but you get the idea)
• SetCPU – for over/underclocking to increase performance or increase battery life (one of life’s true dilemmas)

We’ve lived in a few built up areas around London already, some far more so than Balham, but i’ve never seen so many AP’s in the one residential area before, my scan’s show between 10 – 50 different networks at various times throughout the day.

A ‘lean’ site survey, it’s usually 3-4x as many

Most of the time, my router appears to work perfectly, then suddenly (as much as a couple of times a day), the network connection stops responding and I need to go and change the channel.  A ping of the router looks like this:

shannon@vostro:~$ ping 192.168.1.1
PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data.
64 bytes from 192.168.1.1: icmp_seq=1 ttl=64 time=945.41 ms
64 bytes from 192.168.1.1: icmp_seq=2 ttl=64 time=1401.52 ms
64 bytes from 192.168.1.1: icmp_seq=3 ttl=64 time=2788.41 ms
64 bytes from 192.168.1.1: icmp_seq=4 ttl=64 time=4342.34 ms
64 bytes from 192.168.1.1: icmp_seq=5 ttl=64 time=6309.23 ms
64 bytes from 192.168.1.1: icmp_seq=6 ttl=64 time=10345.58 ms
64 bytes from 192.168.1.1: icmp_seq=7 ttl=64 time=13424.52 ms
64 bytes from 192.168.1.1: icmp_seq=8 ttl=64 time=16435.42 ms
64 bytes from 192.168.1.1: icmp_seq=9 ttl=64 time=17334.73 ms
64 bytes from 192.168.1.1: icmp_seq=10 ttl=64 time=18223.47 ms
64 bytes from 192.168.1.1: icmp_seq=11 ttl=64 time=20994.43 ms
64 bytes from 192.168.1.1: icmp_seq=12 ttl=64 time=22534.4 ms
64 bytes from 192.168.1.1: icmp_seq=13 ttl=64 time=24998.25 ms

With this many AP’s in the area, short of installing a faraday cage in the external walls of the house, I may be forced to use the 5.8Ghz 802.11a band which doesn’t work with a lot of devices such as my old laptop, phones, printer, etc.

• Civilisation 2
• Final Fantasy VII & VIII
• Transport Tycoon Deluxe and more recently OpenTTD
• All of the Grant Theft Auto series, but most recently GTA: San Andreas

On December 3rd, Grand Theft Auto IV came out for the PeeCee, and having refrained from trying it on the Playstation3 or Xbox 360 I gleefully got my hands on a copy and waited out the almost 40 minute install.  I should have known pre-install that there wasn’t a hope in hell it was going to play nicely on the laptop, especially not at a great quality/resolution.  After all, it more than meets the requirement for the minimum required system (from Rockstar Site), and meets most of the requirement for recommended system (the video card is the big let down here).

I can play at the amazing resolution of 800×600 with all higher graphic settings disabled due to low specification of system.  I have to wonder who came up with the idea of limiting the quality settings for lower spec cards, it should be the users choice to wind up the settings and make the game unplayable if they so wish.

Back to the game, as you’d probably guess, the performance on my system leaves a lot to be desired but is still playable, and even explosions don’t seem to slow it down too far, but I’m always left wanting more, especially seeing some of the screenshots of people running it at 1920×1200 on monster machines.

I’m left wondering though, is it worth me spending +£1000 on a desktop machine that can play this correctly or giving up and going back to minesweeper.  I’m not sure i could warrant the price given that this is probably the one title I’ll acutally play this year (as well as in 2009), but considering I got months and months of play out of GTA:SA who knows.  It’s an investment in time I guess, and heck, I’d have spent a lot more having fun on booze in the process.

The game itself is fantastic though, I can forsee in the next few years having a map of London (or New York, or perhaps Tehran) with every building, feature, person manipulatable , almost like a GTA in that corny old VR world of the 80′s that everyone was dreaming about.  I could get coffee in the store I go to every morning at work and then go to work on the office front door with a baseball bat, just for the point of it…

Then I’d escape down the tube to my batcave, or home maybe.

Recently an oppurtunity came up to buy another NAS unit, the QNAP TS-409 Pro, from a friend at work for a good price, so after quick thought and some research (more than I had done for the Icybox!), I snapped it up.  And after a month of use, I havent regretted it.  It’s a four drive SOHO (prosumer, maybe) backup solution which currently has 4x 500GB drives in a RAID5 configuration.

The best things:

• Gigabit network connectivity (realworld gigabit, this time (20 – 40MB/s, much better than the 5 – 10MB/s from the Icybox)
• 4x SATA Bays capable of RAID0, 1, 5, 6 and JBOD configs
• Inbuilt media, iTunes, music streaming server
• Torrent/HTTP queue downloader
• NSLU2 support with iPKG management (basic linux OS with Debian like package installer).
• FTP/Samba/NFS/HTTP file access
• support for USB drives/keys and one touch/scheduled backup of core files, either from the unit itself or from locations around the local network.
• and a whole bunch of other features like web server, database, time server etc etc.

I’m especially interested in the IPKG manager and NSLU2 based linux console as it really closes the gap between useless (or limited use) network device, and fully configurable server or computer, and I’ve got a bunch of scheduled tasks UnRAR’ing downloads, backing up photos and documents, rebuilding/exporting the music collection and downloading new album artwork and doing other system and network diagnostic tasks.  Infinitely useful!

Nothings perfect though, and it can’t all be good, in the case of the QNAP, its loud as hell and building the initial RAID array took a fair few hours but that’s to be expected, and under the circumstances, I think I can let it pass.

It’s great so far, and is turning out to be a welcome change to being mid way through a 2 hour mix as I’m currently used to, and I can listen to a whole range of music I wouldn’t usually get to.

I’m still wondering what the point of the social networking side to this is though, so I can compare my music taste with someone named jeebee34 halfway accross the world and realise my music compatitibility with him/her is only 12%?  What does this prove, that I should start listening to Madonna or Justin Timberlake to boost this rating with my new found online friend?

Last.fm makes use of the concept of scrobbling, which is where whatever you’re currently listening to is submitted up to the last.fm server for everyone to see, and scrutinise.  This doesn’t just work for when you’re listening to last.fm radio itself but through any popular media player (such as iTunes, Windows Media Player, amarok, Exaile, etc), or through any number of music devices, such as an iPod or my Nokia N95.  You’ve go to wonder though, what do they do with all those stored music preferences?  Could it be used to tailor a bunch of music adverts to our inboxes around Christmas time, or perhaps used in court to prove that we’d listened to a bunch of Metallica music, far more than one person could possibly own?

All that aside though, I’ve been quite impressed at how well it can map music choices to a chosen genre or tag, and searching by tags or artists return results you’d expect (mostly, anyway).  A friend searched for music like Daft Punk the other day and was blessed with the sweet soothing sounds of koRn, so I’m not sure what went wrong there.

Favourite Tags so far:

• dnb
• progressive trance
• psytrance (see a trend happening here?)

So if you’re a last.fm’er, jump on, look at my profile and add me

]]> http://www.hd911.com/2008/09/lastfm/feed/ 1 http://www.hd911.com/2008/09/ranting-again-the-cold-hard-speed-of-icybox/ http://www.hd911.com/2008/09/ranting-again-the-cold-hard-speed-of-icybox/#comments Sun, 07 Sep 2008 23:57:41 +0000 Shannon Carver http://www.hd911.com/?p=196 As many of you know, I bitch frequently, and today is no exception.  I’m not just bitching about slow transfer speeds from a restricted device which should be capable of far more (yes, the N95), I’m over that now, as there a bigger demon in its midst.  One that defies all logic completely, to which I can find no possible explanation, apart from shit-ness by the manufacturer in question.

Disclaimer: The paragraphs below will be boring, and slightly technical, and my contain Vendor Verdicts which whilst not directly opposing HD911′s stringent rules regarding Product/Name Defamation and the Fair-trade and Distribution Protection act of Liverpool 1983*

I bought a NAS (Network Attached Storage) unit from a relatively reputable online computer dealer in England at the end of last year after much deliberation and a little mis-directed (and now seemingly useless) research.  For the money, the unit was supposed to be one of the better performers.  At the time I bought two hard drives to go along with the unit, which were one of the faster drives available on the market at the time.  The NAS, an ICYBOX NAS4220-B (you can see here the name of the offending company has been removed to comply with HD911′s policies), flat out refused to boot/function or do pretty much anything with the new drives.

A little time ticked by, and (stupidly) the owner and purchaser did not RMA either the drives, nor the NAS unit in time, and the store would no longer accept the products as refunds, so I used the hard drives elsewhere and shelved the obviously trusty unit for another day.  Over the next few months, I tried the drives with a few different versions of the Icybox’s firmware, and even went to the extent of disabling features on the drives themselves to see if they would wotk, but still had no luck.

Fast forward to August 2008, I purchased a cheaer, lower spec harddrive to go in the unit as it could surely serve a better purpose than sitting in the cupboard gaining dust, for this aluminium monstrosity cost £100, and that could have been better spent on beer or a treatment program for the authors ever growing fascination with the game World of Warcraft, and a level 40 dwarf (sorry, little person) named El-dorf.

You must understand, by this point I had an amazingly profuse dislike for the pre-purchased NAS unit, neither it nor its manuracturer website or support forums inspired any confidence at all in a good product.  But I wanted it to work, at least in half the way you’d expect a unit to function.  There’s an element of pride here too, and an IT guys damaged ego over a poor purchase decision can be difficult to mend, as I usually make good, educated decisions about what a good product is and where/how to buy it.

So the new hard drive worked as it should and I was away, madly copying the collected works of self-recorded flute solos, and bad karaoke-style ABBA renditions, but noticed something astounding, transfers via built in “gigabit” network connection were going unusually slow.  Just to back this up, I have a laptop hard drive that can quite happily read/write at 40-50MB/s for sustained periods, a Broadcom gigabit port that should be capable of at least this plugged into another gigabit port on the NAS.  The top speed for the 15 hours of transferring was 5MB/s, not even a quarter of what I would deem reasonable, and hardware I had 12 years ago quite happily chugged away at a quicker speed than this.

I’ve done the normal thing and taken everything possible out of the equation, tested via different PC, new/different cable, through a switch, over wireless (not that I was expecting higher speeds this way mind you), and chanted sweet nothings at it, but to no avail.  It seems that the manufacturer thought they’d add yet another shitty feature (to enhance the plethora of other teeth-nashing inadequacies), that being horrendous speed.  In fact, I can quite happily transfer over the gigabit network to other devices at 50MB/s, and the 802.11g wireless network at 3.5MB/s.

If I was to review this product, and say something nice about it, I’d say it would stand the test of time as a door stop, and wouldn’t look out of place next to the 1960′s Parasonik tube amplifier rip-off that your parents still have sitting in the garage, it really is that cool.

Subsequently I’m saving up the money for a better unit (with supporting research) as we speak.

* Link to Legal Documentation required, consult this document for further information (#1443253)

As I’ve said before, since leaving my previous position as a C#/ASP.NET minded monkey, I’ve been tooling, (or should I say battling), with the infamous choice of script kiddy and billion dollar social network empire, PHP.  It truly lives up to its meaning as the Palace of Hedonistic Pleasure, and continues to be an outstanding joy to work with, and you know i mean this in a completely non-sarcastic way.

That’s not to say its hard, it just seems to open the void between what is right and wrong a lot more than other languages I’ve worked with of late.  Think of it like riding a bike, there’s a right and wrong way to ride a bike, and once you learn, it’s usually smooth sailling.. You can either keep speed and move forward (right), or fall off (wrong).  PHP works in much the same way, but provides the stupid (me) with many many more ways to fall off.  And from what i’ve seen so far, it doesn’t take much to end up over the handlebars, face planting into a wall with the still-spinning front wheel grinding away at what little is left of your thigh, tummy or scrotum if one is that way inclined.

After an lengthy conversation discussing (bitching) how easy falling off the proverbial bike is, a colleague at work, said, “That’s the way it works, you take the good with the bad, it’s a state of PHP-ness.”

At which point I cracked up laughing, and forever more when I cringe at some of our code base, a smile will peel across my face.

p-h-p-ness  (pee-h-p-ness)

As part of the build process we’ve done a recent refactor which improves performance and security and aims to generally make our service easier to consume by every device that uses it.  This process has taken the better part of six weeks next to full time work by four of us and at least two weeks work from a fifth person that left recently.  I don’t want to say I’ve poured my heart and soul into it, that would be lieing, but its definitely been something that we’ve become immensely proud of.

Anyway, today the decision was made to drop all the work completed toward the new version, and continue where we forked off on the previous release, which really is a huge shame.  Now I feel like we’ve taken a step backward, erasing a bunch of work that would have ultimately made the project a lot more stable and laid a few of the foundations for future-proofivity, if thats even a word.  I shouldn’t get too aread of myself though, in reality it was months away from the final goal, but at least there was move towards that goal.

I shouldn’t be surprised though, there seems to be many examples of this and far worse (mal)practices in the IT industry around the web, and it seems to me to often be the way the things work, especially in smaller Software Development situations.  I’ve even seen it before at previous jobs, and its never pretty.

The thing that gets me though, is the absolute waste of resources and man-hours that goes into a mistake such as this.  Assuming we worked two thirds of the week each, I’d put the time spent at:

4.5 staff x 27 hours x 6 weeks  = 729 man hours

By my crude calculations this is just about enough man hours to build a small skyscraper, or the Titanic if you will, but… That’s Life, after all!

Who knows, in another month, the project will probaly take another path altogether requiring a complete rewrite, refactor or perhaps disbanded altogether!

I needed to send a friend an SMS back home (Australia) the other day, and my phone had run out of batteries, again, though I did forget to charge it the night before.  That was when I remembered Web2Msg.com, which allows you to send free SMS messages to any Australian mobile phone (or cell, if you roll like that).  The best thing is, there’s no signups required, no annoying popups, and no forced advertising in the sent messages.

So, if you’re a bum, and you can’t afford a mobile phone battery, or credit for your prepaid phone, give it a go!  And best of all, it’s a feat of .NET programming.

Winamp v2 – Basic, like a crappy car stereo

Sonique media player was a funky upstart that was in development about the same time, which had a completely different approach to to the MP3 and media playing application.  It went outside the box, of what a normal application looked like with funky designs and skins that didn’t fit into the shape of a normal window, and if I remember correctly came standard with a host of plugins, visualisation and other addons.

Sonqiue’s interesting style

Now, to the point of my post!

I was talking to one of the guys at the office the other day, and it turns out he was one of the lead developers on the Sonique application and some of the plugins that came with it to produce oh so clear crystal sound.  He spoke of the hype surrounding the application, and the chance at millions when bought out by Lycos (I think??!), and subsequent downfall as the other competitors tried different/more successful things.

This proves basically nothing except that once again, the world is a tiny place, but oh well, I still think Winamp was the better player!

Off topic, but I still happen to have the original set of MP3′s I first managed to download all those years ago (digitally copied many times of course), but the tracks have managed to stay (embarrisingly) in the collection all these years and have kept their original script kiddie style filenames.  These include such greats as:

• John Denver’s, Thank God, I’m a country boy (aptly name Denv-ThankGod.mp3)
• various Smashing Pumpkins songs
• Paul Simon, You can call me Al
• Pink Floyd
• Stairway to Heaven by Led Zeppelin

and many more! Random!